Why is my Whirlpool oven not working?

Why is my Whirlpool oven not working?

If an oven won’t turn on there could be an incoming power problem. One of the wires that supply power to the oven element or igniter might be burnt out. These wires commonly burn out near the heat source. To determine if a wire has burned out, inspect the wires leading to the element or igniter.

How do I reset my Whirlpool electric range?

Reset power to the product:Power unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Monitor the oven/range for one (1) minute to ensure the error code does not display again.

Does a Whirlpool oven have a reset button?

Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall. If it is a range/oven combo, make sure it is plugged securely into the wall.

Does my Whirlpool range have a fuse?

The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. NOTE: Remember to disconnect the power from your range before you start this repair.

Why did my oven suddenly stopped working?

An oven that won’t heat is usually the result of a faulty igniter (for a gas oven) or heating element (for an electric oven). If both your gas oven and your gas burners have stopped working, the problem is most likely with the gas line, and will require professional repair.

Where is the fuse in my oven?

Servicing Fuses If the range or oven is receiving power but doesn’t work, the unit may have its own fuse or circuit breaker assembly. This assembly is usually located under the cooktop of the range.

Do electric ranges have fuses?

Many electric ranges include a fuse in the 120-volt circuit that operates such items as oven and stovetop lights, the electric clock, convenience outlets, etc. Visually inspect the fuse to see if it has blown. The fusible link is visible through a glass window in the top. If the fuse is good, this link will be intact.

Why is my stove working but not my oven?

If the oven is not working, but the burners do, check the following: Make sure that the oven controls are set correctly for either bake or broil. On self-clean ranges, check the oven door to make sure it is in the unlocked position. Carefully inspect the bake element (lower element) for cracks or breaks.