Why is my Whirlpool Cabrio washer not spinning?

Why is my Whirlpool Cabrio washer not spinning?

If your washer doesn’t spin or pump water out but the motor is running, your washer probably has a frozen pump pulley. If so, you need to replace the pump. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn’t turn freely–if it’s frozen or stiff–replace it.

Why did my washer stop spinning?

Check the washing machine’s spin cycle. If the spin cycle works, the motor is operating and the belt is not broken. If the spin cycle doesn’t work, the belt may be loose or broken. Tighten or replace the belt.

How do you run a diagnostic on a Whirlpool Cabrio washer?

HOW TO ACTIVATE DIAGNOSTIC MODE ON A WHIRLPOOL CABRIO WASHERPress and hold that button for 3 seconds, then release it for 3 seconds.Press and hold it again for 3 more seconds, then release it for 3 seconds.Press and hold for 3 seconds.

Can you bypass a lid switch on a Whirlpool washer?

Most washing machines come equipped with a lid switch. This switch is connected to a solenoid that completes a circuit, allowing the machine to run only if the top is down. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.