Why is my washing machine not getting hot water?
Check to be sure the hot water inlet hose is not clogged If it is, no hot water can enter washer. Examine the hose mesh filters that go in between the hoses and the washer Mesh filters can clog and restrict water flow.
Why is my GE Washer not filling up with water?
Machine Won’t Fill If your washer won’t fill, check the hot and cold faucets to make sure they’re both turned on fully. Check the fill hoses, which connect to the upper back left of most GE washers, and make sure the line has no kinks. If the problem persists, turn off the water and remove the fill hoses.
How much does it cost to replace a washer pump?
The most important part is a new washer pump. It can cost as little as $10 or as much as $75 or more. However, most homeowners pay between $25-$40 for a new pump.
What would make a washing machine leak from the bottom?
Leaks under the washer are commonly caused by a damaged water pump or compromised hoses connected to the pump. Usually, you will notice lots of rumbling or shaking from the machine during a wash cycle if the pump is faulty. The water pump in a washer is generally located at the bottom of the machine.
Can overloading a washing machine cause it to leak?
The washer can leak if it is overloaded or out of balance. Check to be sure the washer is level, reduce load sizes, and keep an eye out for the leak. If you have a washer that features a spray rinse function, interfering with the cycle by manually advancing the timer can cause the washer to leak.
Is there supposed to be water in the bottom of my washing machine?
Yes, there should be water in the tub. You normally don’t notice it because of the inner basket. The water keeps hoses and the pump seals from drying out. A dishwasher does the same thing.