Why is my Subzero not making ice?
Verify the ice maker water fill tube is not blocked. See Ice Maker Fill Tube Frozen. After freeing obstructions, turn the unit off, then on again to reset. If ice production stops often with the use of a reverse osmosis system or well water, a pressure booster or regulator may improve performance.
How do you reset the filter light on a Sub Zero ice maker?
Turn the cartridge one-quarter turn counterclockwise until it pops out. Use a jar opener to help provide a better grip for a hard to remove filter. Reverse the process to install the new water filter. Once the filter is replaced, press the CLEAN key for 6 seconds to reset the counter and light.
How do I fix my Sub Zero ice maker?
Sub-Zero Ice Maker Troubleshooting: Not Making IceCheck the water filter. Check that the ice bucket is correctly placed. Check that the ice level arm is in the down position. Check whether the fill tube is frozen. Check that ice isn’t obstructing the exit from ice maker. Check the water supply lines.
How do you unlock a Sub Zero ice maker?
To lock the dispenser:Press and hold the Light button for 5 seconds to turn on the dispenser lock. The lock indicator (key icon) beneath the Light button illuminates when the dispenser locks. Locking the dispenser disables the water and ice dispensing features.To unlock, press and hold Light for 5 seconds.
How do you force defrost a Samsung Ice Maker?
A Beep should sound and defrost begins. For dispenser models, press Freezer (top left) and Lighting (middle right) buttons simultaneously for about 8 seconds, until the display goes blank. Then, press any other button until “Fd” appears. After complete you MUST disconnect from power to reset!