Why is my LG washer making a grinding noise?

Why is my LG washer making a grinding noise?

Worn Tub Bearing. The tub bearing is a small metal bearing on the outside of the washer tub that helps it spin smoothly. Over time, water can seep through the washer drum and rust the bearings, resulting in an LG washer making a grinding noise when spinning.

How do you unlock a Whirlpool Duet washer?

How to Unlock a Whirlpool Duet Washing MachineReach up inside the front panel and locate the door latch assembly on the right side of door.Feel for a tear-drop shaped tab on the bottom of the door latch assembly. This tab will manually unlock the door.Gently pull down on tab about 1/4 inch or until you hear a click. The door should open.

How do I unlock my Samsung Bubble Wash 7.5 kg?

1 Press the Spin Only button for 3 seconds.Press the Start/Pause button to unlock the door. Open the door, then add or remove laundry. After closing the door, press the Start/Pause button to restart the wash. To change a cycle, you may tap the Pause button and then change the cycle.

How do I unlock my Samsung washer during a power outage?

The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.

How do I open my Samsung washer door mid cycle?

When the tub is filled with water. Select Spin to drain the water. Then you will be able to open the door….Open Samsung Front Loader door mid cycle Press the Start/Pause button to unlock the door. Open the door, then add/remove laundry. After closing the door, press the Start/Pause button to restart the wash.

How do I reset my Samsung Bubble Wash 7.5 kg?

To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. (Unplug the washer from the wall outlet or flip the breaker in the breaker box for the washing machine).

How do you open the washing machine door mid cycle Indesit?

To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened. Press the START/ PAUSE button again to restart the wash cycle from the point at which it was interrupted. 8. THE END OF THE WASH CYCLE.