Why is my KitchenAid fridge not dispensing water?

Why is my KitchenAid fridge not dispensing water?

If the dispenser paddle or pad is not fully engaged, the dispenser will not dispense ice and/or water. Check to make sure the glass is engaging the paddle or switch by firmly press the pad or paddle. Select water or ice on the display (Depending on Model). Firmly press a sturdy glass against the dispenser paddle.

What causes water dispenser to stop working?

Check to see if the tube bringing water in has a little debris screen on it, which may have gotten clogged. If so, clean the screen to allow water back into the water dispenser. Check the inlet tubing for blockage, and make sure the manual water shut-off valve is clean and clear on the inside.

Why is my ice dispenser not working?

Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it. Locate the shut-off valve, typically underneath the sink or behind the refrigerator. Cause: There is also a possibility that the water filter for the ice maker is clogged.

How do I unlock the water dispenser on my KitchenAid refrigerator?

Press and hold TO LOCK for 3 seconds to lock the dispenser. Press and hold TO LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked. Controls, Settings and Features vary by model; Check your Owner’s Manual for specific information.

Why is my water not coming out of my fridge?

The first, and most common reason is that your water tube in the door is frozen. Another possible cause for this issue is a faulty water inlet valve. This valve opens the water supply to the dispenser; therefore, if the valve is defective or if the water pressure is too low, the water valve won’t open.

How do you unlock a KitchenAid?

Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.

How do you unlock the control lock on a Kitchenaid stove?

Find the control lock button on the dishwasher’s keypad. The button responsible for the control lock varies from model to model. Hold the lock button for 3 seconds to unlock the control panel.

How do I unlock my Kitchenaid stovetop?

If Control Lock is activated when power to the cooktop is on, all keypads are locked out except for Power and Off. To Unlock Cooktop: Touch and hold LOCK for 3 seconds.

How do I reset my Kitchenaid washer?

If you just need to reset a cycle, simply press and hold the Cancel or Cancel-Drain button to reset the cycle and choose a new one.

How do you reset the control panel on a KitchenAid refrigerator?

Reset power to the product:Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.Power unit up by turning on the circuit breaker(s) or plugging the product back in.Ensure the cooling function is turned on.Test the control panel functionality.

How do I reset the control lock on my KitchenAid dishwasher?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.

How do I unlock my dishwasher?

To unlock the dishwasher control panel, press and hold the NO HEAT DRY button for 4 deliberate seconds and the LOCK ON light should turn off. The control should then work normally. If the control will not unlock after using this procedure, then you could have a failed console or a bad electronic control board.