Why is my dryer stuck on sensing?

Why is my dryer stuck on sensing?

As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry.

Why did my dryer suddenly stop working?

Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.

Can a dryer overheat and stop working?

Heat and controlling heat are essential to the dryer’s function. Overheating is a serious concern, and to combat it, dryers have thermal fuses. A faulty or broken thermostat can make a dryer stop working. Replacing the fuse or the thermostat will allow the dryer to work again.

Is it safe to bypass a thermal fuse?

Bypassing a Dryer Thermal Fuse Operating a dryer with a bypassed thermal fuse is both unnecessary and unsafe, so a bypass should only be done long enough to troubleshoot a potential problem. Even short usage without a thermal fuse in place could result in irreparable damage to the appliance or injury to yourself.

What causes a thermal fuse to fail?

Thermal fuses burn out to prevent fires. The leading cause of thermal fuse burnout is obstructed airflow. Check the exhaust path for excessive lint or debris all the way to the exit point of the exhaust pipe. Check the blower wheel to make sure it isn’t broken or clogged up.

Are all dryer thermal fuses the same?

All dryers sold in the United States are legally required to have a thermal fuse. This is different from the electrical fuses that are found in many appliances, and a dryer might have both. A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current.

Are thermal fuses for dryers universal?

Thermal fuse WP3392519 shuts off the burner in a gas dryer or the motor in an electric dryer when the dryer overheats. A universal part, widely used in dryers of various brands: Whirlpool, Maytag, Kenmore, Crosley, Amana, Admiral, Estate, Roper, etc. Different from Thermostat, the Fuse is not resettable.

Does Home Depot sell dryer thermal fuses?

Thermal Fuse – Dryer Parts – Appliance Parts – The Home Depot.

Do thermal fuses wear out?

Sometimes, a fuse will simply wear out after years of repeated use and simply stop working. Any of these could result in the overheating of your dryer which leads to a thermal fuse that will blow. So be sure you discover what caused the fuse to fail otherwise, you will have to replace another one soon after.