Why does my Viking cooktop keeps sparking?

Why does my Viking cooktop keeps sparking?

Turning the gas control knobs at the front of the unit to the “light” setting causes the electric ignition to create a spark. An ignitor that keeps clicking might not create the spark necessary for ignition. Replacing the ignitor or the ignition switch at the front of the stove may be necessary to repair the issue.

Why is my stove not sparking?

Whether it’s grease buildup or food crumbs, one of the most common causes for a gas burner that has trouble igniting is debris blocking gas flow to the igniter. The fix: Begin by removing the grate covering the troubled burner. Reinstall the burner, cover and the grill, and try igniting the burner once more.

How do I stop my stovetop from sparking?

One of the most common reasons a gas stove starts clicking is because the burner cap is out of alignment. Once the cooktop is completely cool, remove the burner grate to access the cap beneath it. Remove the cap and re-center it on the base. Try lighting the burner again.

How do I know if my spark module is bad?

How to Tell if You Have a Bad Ignition Control ModuleCheck engine light is on: The ECM monitors all parts of the vehicle that could affect emissions. Engine is misfiring or running rough: An engine misfire results from incomplete combustion. Stalling: A failing ignition module can occasionally prevent the engine from getting spark, causing it to stall.

How long does a Viking oven last?

Viking ranges are known to last from 10 to 20 years in general. Gas models typically last fro 15 years, and electric models 13 years. However, the brand strives to make ranges that last up to 40 years to compete with professional-grade appliances.

Why is my gas stove clicking when it’s off?

If your stove or cooktop igniters won’t stop clicking after the burner is turned off, it may just need a good cleaning. This is actually one of the most common causes of a continual clicking sound. If your cooking gets a bit messy sometimes, food debris can get lodged around the ignition system.

Where is the pilot light on a Viking oven?

There are no pilot lights on a viking oven, there are igniters below the floor in your oven. Sounds like your oven igniter below the floor inside your oven is just starting to fail and needs to be ordered and replaced.

How do you ignite a Viking grill?

Press the electronic ignition button which corresponds to the rotisserie control knob. You will hear a clicking sound. After the burner lights, hold the rotisserie control knob in about 5 seconds longer or until the burner remains lit. Once lit, turn the control knob to the desired setting.

Why is my wolf range clicking?

If the burner clicks when the charbroiler is in use, turn on the ventilation hood. Wolf suggests turning on the hood 5 minutes before the charbroiler. Make sure the burner control knob is not stuck in. Clean and dry the burners using the Wolf Cleaning Reference Guide and How to Clean Surface Burner Caps and Rings.

How do you clean Wolf burner caps?

To clean the surface burner caps and rings, follow these steps:Allow burner base and cap to cool.Dampen a soft cloth with mild detergent or spray degreaser to clean.Do not get the ignitor wet or spray cleaner into the burner ring. Rinse with water.Towel dry.