Which water line is hot for washer?

Which water line is hot for washer?

1995 and newer – Cold water inlet connection is located on the left and the Hot is on the right as you face the back of the washer. A “C” and “H” is stamped in the metal above each valve. 1994 and earlier – Cold water inlet connection is located on the top and the Hot is on the bottom.

Can washing machine be connected to hot water?

1. We do not recommend connecting washing machines to a hot water line. Technically, the inlet valves of our machines are designed for water up to 65C, but the washing programs do not always use hot water, and the water used for washing can not be cooled down again.

How do I connect my washing machine to hot and cold water?

Attach the hoses to the faucets–hot to hot and cold to cold. Again, hand tightening should be sufficient. Next, insert the washer’s drain hose into the drain pipe (yes, it just slides in), and plug the washer in. At this point, slowly turn the faucets on.

Which water valve is hot or cold?

Typical plumbing for a kitchen sink includes a drain line and a pair of water lines with shutoff valves under the sink. In most cases, the hot water is on the left and the cold water is on the right.

Does a washing machine need hot and cold water?

The majority of washing machines will only be connected to the cold water supply and will heat it during the wash cycle.

When should I use hot water for laundry?

When to Use Hot Water – For whites, typically dirty clothes and diapers, use hot water (130°F or above). Hot water is best to remove germs and heavy soil. However, hot water can shrink, fade and damage some fabrics, so be sure to read your clothing labels before selecting the hot option.

Can I do laundry without hot water heater?

Consumer reports says hot water isn’t necessary to do laundry. A caveat is that you’ll need to warm water on your stove, but it’s still a good option to have on hand.

How many gallons of hot water does a washing machine use?

ENERGY STAR states that, on average, an ENERGY STAR certified washer uses 14 gallons of water per load, while a standard washing machine uses 20 gallons of water per load1. Based on this, an ENERGY STAR certified washer could save you about 6 gallons of water per load compared to a regular washer.