Where is the model number on a Kenmore Elite refrigerator?

What size is my Kenmore Elite refrigerator?

On Kenmore refrigerators, the 3rd or 4th digit of the model number after the 3 digit prefix (106) will normally indicate the size of the refrigerator. Af it is usually the 3rd digit that indicates the size. For example; a digit “5” could indicate a 15 cu.

Where is the reset button on a Kenmore refrigerator?

There is not a reset button on most models of refrigerators. Unplugging the refrigerator for several minutes and then plugging it back in will sometimes reboot the electronic control board on the refrigerator (if it has a control board).

How do I reset the thermostat on my Kenmore refrigerator?

Open the refrigerator and press the “Off” switch on the thermostat to turn it completely off. Plug the power connector back into the wall and the move your refrigerator back into place. Wait up to eight seconds; the defrost timer will become reset. You can then turn the thermostat switch back into the “On” position.

What is the best temperature for a Kenmore Elite refrigerator?

37degrees F

What is the proper setting for a Kenmore refrigerator?

Usually 37degrees F, is the proper temperature for a refrigerator and 0 degrees F, for a freezer. When you continue to press the adjustment button, the reading should cycle to the highest reading possible, then decrees from there.

Where is the temperature control on a Kenmore Elite refrigerator?

Kenmore Elite Refrigerator Temperature The Kenmore refrigerator temperature control location is at the upper back wall of the inside of the refrigerator. The higher that the Kenmore Smart Reach refrigerator temperature control number is, the colder the temperature will be.

What is the coldest setting on a Kenmore refrigerator?

1 is the warmest setting and 7 is the coldest. You should have your freezer set for 4. This equals to 0 degrees. The refrigerator should also be set to 4, which equals about 37 degrees.

What number should I set my freezer to?

The recommended freezer temperature to keep your food safe is at or below 0°F (-18°C), but your freezer may need to be set higher or lower depending on its environment and other factors. The typical freezer factory setting on Whirlpool® refrigerators is a great starting point at the recommended 0°F (-18°C).