What temp should a Kenmore freezer be set at?

What temp should a Kenmore freezer be set at?

What temp should a Kenmore freezer be set at? Keep your freezer temperature within the safe range. Kenmore recommends setting your freezer compartment between 0 and 2 Fahrenheit or -16 or -17 Celsius. Food is safely frozen at this temperature, reducing the risk of food thawing out and spoiling.

What is the coldest setting on a Kenmore freezer?

Numbered 1 through 7 with 7 being the coldest setting. The usual procedure is to set the controls in the middle and then give it 24 hours to cool properly and check the temperature. You will need a thermometer to check the temperature of the unit after 24 hours. The idea temperature for a freezer is 5 to 15 degrees.

Where is the thermostat on a Kenmore upright freezer?

On most Kenmore models, the thermostat is on the back of the unit for side-by-side devices and at the bottom of the fridge for the over-under units. Remove the panel covering the thermostat. You may need to use a screwdriver in order to do so. Then, check the coils of the thermostat.

Why is my Kenmore freezer defrosting?

Common solutions for: Kenmore Freezer coils frozen. The defrost heater turns on several times throughout the day to melt away any frost that may have accumulated on the freezer evaporator coils. Before the defrost heater turns on, the defrost thermostat must sense that the evaporator coils are cold enough.

How do you reset a Kenmore Elite chest freezer?

Simply so, how do I reset my Kenmore Elite upright freezer? Press and hold the Up and Down arrows at the same time while plugging the outlet cord back in. Press and hold the Alarm Reset button for 3 seconds to disable the control lock. Press the Up arrow 3 times to display the #1 setting.

How do I test my freezer temperature sensor?

You can test your thermistor(s) using an ohm meter or multi-meter. The best way to do this is to remove the thermistor from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature or grab a glass of ice water to test the thermistor.

How do you know if a thermistor is bad?

Look for signs of a faulty thermistor. A steady reading that does not change, a reading of zero or a reading of infinity are all indications that the thermistor needs to be replaced. The change in reading will not be smooth or there will not be any change.

How long does a defrost cycle last?

approximately 25 to 45 minutes

How do I know if my defrost heater is bad?

How do I test my Kenmore defrost timer?

How do you know if your fridge is defrosting?

Complete a visual inspection of the ice buildup in the freezer. If the ice appears wet or slushy, it indicates the refrigerator is in defrost mode.