What is wrong with my washing machine?

What is wrong with my washing machine?

A washing machine not draining is one of the most common problems we encounter. It can be caused by one of the following: – The drain hose or pump is clogged with a small item of clothing, residual gunk or other debris. – The washer is malfunctioning and not engaging the drain/spin cycle properly.

How do I balance the drum on my Samsung washer?

1 Turn the washing machine off and then on again.2 Hold down the Temp and Delay End + buttons for 3 seconds until a “CB” code appears on-screen. 3 Press Start/Pause to run the Calibration cycle.4 The drum will rotate clockwise and counter-clockwise for up to 3 minutes.

How do I fix the spin cycle on my Samsung washer?

Why is my washer stuck on spin cycle?

If you have a GE washer that’s stuck on its spin cycle, you’ll need to reset the machine. This is because the appliance is full of water during this cycle, and merely turning off the washer will leave it filled with water. Next, plug the washer back in and lift the lid six times in 12 seconds.

Why is my washing machine drum not going round?

Do you have a blocked outlet pipe? This is possibly the most common reason a washing machine drum will fail to spin. Because when a washing machine’s outlet pipe gets blocked, the water will not drain away – preventing your cycle from starting. This will usually be accompanied by a foul smell.

How do I reset my Samsung self cleaning washing machine?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Do you use detergent on self clean cycle?

You don’t need to add any bleach or detergent if you’re just running a routine Self Clean, although we do recommend a process for using bleach if you already have an existing mold smell (see our guide for details). Self Clean (also called Pure Cycle or Self Clean+) is a special cycle that prevents mold.