What does ur mean on a Samsung top load washer?

What does ur mean on a Samsung top load washer?

unbalanced and retrying

How do you calibrate a Samsung top load washer?

Power off, and then power on the washing machine.Hold down Temp. and Delay End+ simultaneously for 3 seconds to enter Calibration mode. Press and hold Start/Pause (Hold to Start) to run the Calibration cycle. When the cycle is complete, 0 appears on the display and the washing machine will turn off automatically.

How do you rebalance a Samsung washer?

Run calibration mode on your washer:Remove everything from your washer.On the WA456, press the Delay Start and Eco Plus buttons simultaneously, and then press. Press the Start/Pause button to activate Calibration Mode.The pulsator rotates clockwise and counterclockwise for approximately 1 minute.

How dO I reset my Samsung washing machine?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Why does my Samsung Washer not start?

First ensure that power is getting to the electrical outlet. If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.

Where is the filter on a Samsung top load washing machine?

The debris filter is generally present in the lower back portion of the Washing Machine.

Does a Samsung top load washer have a filter?

1 Open the pump filter access panel by pressing in on the cover. Note: Top load washers and some older front load washers do not have a removable pump filter.

How often should a self clean cycle be run?

Although you do not need to run a Self Clean cycle immediately, we recommend that you run one at your earliest opportunity. It’s also a good idea to run one at least once a month if you do not do many washes in a month. Self Clean (also called Pure Cycle or Self Clean+) is a special cycle that prevents mold.

Do all washing machines have a lint trap?

You washer’s lint trap or lint filter is located within the washing system, however. Depending on the type of washer, mesh lint traps or cleanable filters may be used. High-efficiency washers typically do not have lint traps or filters, however; they rely on built-in pump filters that self-clean.

How do I get lint off my top loading washing machine?

Fluff in washing machines can also be caused by a build up of lint in parts of the washing machine other than the filter. Running your washing machine on an empty cycle with a cup of white vinegar or washing machine cleaner will remove lint from every corner of the washing machine.