What does OL mean on washing machine?
How do you run diagnostics on a Maytag Bravos washer?
Console & Indicator Diagnostic Test ModeThe washing machine should be in standby (off) mode.Press and release the following buttons within 4 seconds. if successful “dt” should display on the washing machines indicator.Whithin 5 seconds press “Start” all indicator lights should come on and 88 should be displayed.
How do I reset my Maytag Bravos Quiet Series 300 washer?
Top Load Washer – Hydrowave Motor ResetUnplug the washer for 1 minute from the electrical outlet.Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. The motor has now been reset and is ready for you to start a cycle.
How do you clear the error code on a Maytag Bravos washer?
In both the Bravos and Maxima model washers, an “F##” or “F##, E##” code other than those listed indicates a system error. To clear the code, press the “Start/Pause” or “Power/Cancel” button. Restart the washer by pressing the “Start/Pause” or “Power/Cancel” button again. Additionally, how do I reset my Maytag washer?
How do I find the error code on my Maytag Bravos washer?
What does f5 and e3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
Can I bypass the lid switch on my washer?
Most washing machines come equipped with a lid switch. This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.