What does lf mean on a Cabrio washing machine?

What does lf mean on a Cabrio washing machine?

Long Fill

How do you reset a Cabrio washing machine?

Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.

What does FL Lo mean on a washer?

error code

How dO I clear the error code on my Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How dO I reset my Whirlpool front load washer?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.

Why will my Whirlpool washer not start?

To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it.

How do I know if my washing machine agitator is bad?

How do I know if my washing machine agitator is broken?

The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.

How do you fix a washer that won’t agitate?

How do you fix a loose agitator in a washing machine?