What does it mean when your oven says f9?

What does it mean when your oven says f9?

An F9 error code on a General Electric (GE) oven indicates that the oven’s electronic control system has detected a problem with the automatic door lock. The malfunction may be a jammed door lock mechanism, a pinched or broken wire, a faulty lock switch or a fault in the control board itself.

How do I fix error code f9?

The F9 error usually means the door switch circuit system is faulty. This can be addressed by checking the door switch itself. If the door switch is dirty or caught in one position, use a damp cloth to wipe the switch clean and then wiggle the switch slightly to make sure the switch moves back and forth.

How do I get my oven off clean mode?

To cancel a self-cleaning oven cycle, press the keypad button marked cancel or off. This should immediately halt the cleaning cycle. Press the Timer button twice to stop this function, which can also read Timer Off or Timer Set/Off.

Why is my self cleaning oven not working?

The self-clean cycle will not start if the oven temperature is too high. After cooking in the oven, allow it to cool completely before setting the oven for self-clean. With both gas and electric ovens, check the Owner’s Manual to be certain the self-clean cycle was set up properly.

Why is my electric cooker not working?

If only one leg is voltage is shut down by a tripped breaker or a blown fuse, the oven will not power up. Look at the breaker and fuse box. If a breaker is tripped or a fuse is blown, reset the breaker or replace the fuse and try turning on the oven once again. If the oven powers up, you have found your problem.

Why does my stove work but not my oven?

The element may be burnt out. You can check this by removing the burner and performing a continuity test. If it passes, look for looses wires or connections and perform a test on the thermostat control. Be sure to unplug the stove or turn off the breaker in the main panel before you do any work on it.

How do you fix a gas oven that is not heating?

Why does my gas oven take so long to heat up?

A: The likely issue is a weak or failing oven igniter. Heat resistance igniters can lose resistance as they get hot over time and won’t send enough resistance to the gas valve to allow the main valve to come on. Most gas ovens should heat to 350-degrees in about 7-to-8 minutes.