What does f7 mean on a microwave?

What does f7 mean on a microwave?

The oven could not execute the function. There may a problem with the Appliance Control Board, or the associated wiring.

How do you reset a KitchenAid microwave?

Reset power to the product:Power unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Start a bake cycle.Monitor the oven for one (1) minute to ensure the error code does not display again.Verify oven operation.

Why does my microwave say error?

The SE error code indicates that you have a stuck key on the control keypad or a failed electronic control board. A technician will need to diagnose and repair this type of failure. Microwaves are inherently dangerous to service. These are the reasons that I recommend having a technician service the microwave.

Why won’t my GE oven open after self cleaning?

If there is food in the oven, let the oven cool to room temperature and try to unlatch the door. If no food or utensils are in the oven, start a self-clean cycle, then hit Clear/Off after 60 seconds. If that does not unlock the door, run a short self-clean cycle (1-2 hours).

How do I remove the GE wall oven control panel?

How do you remove the control panel from a GE wall oven?Turn off the oven breaker in your fuse box to disconnect power to the oven.Pull off the knobs on the front of the control panel. If necessary, use a spoon to help pry them off.Remove the three screws located on the underside of the control panel and set them aside.Lift the control panel off of the oven.

How do I unlock my Kitchenaid wall oven?

Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.

How do I turn off the control lock on my KitchenAid oven?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.