What does f21 mean on a May Series washer?
What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected.
How do I clear the error code on my Maytag commercial washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does OD mean on my Maytag washer?
Error “od” means that your washer thinks the door is open. If the door isn’t really open then you’ll need to replace your door latch assembly to fix the issue because it has failed. Try to unplug the washer for 60 seconds to see if the electronics will reset.
How do you reset the f20 code on a Maytag washer?
An F20 or FH error code indicates a water supply problem. Here are some common issues: Are both the hot and cold water faucets turned on?…Removing the ErrorUnplug the washer or disconnect the power for one minute.Plug in the washer or reconnect the power.Re-select the cycle and press Start.
Does a Maytag washer have a reset button?
Is there a reset button on a Maytag washer? Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
How do I reset my Maytag washer?
How to Reset a Maytag WasherPress the “Power/Cancel” button.Push the appropriate button to choose a new cycle.Press “Start/Pause.” You have now reset your Maytag washer.
What do you do when your Maytag washer won’t start?
Why is my Maytag washer not starting?
First ensure that power is getting to the electrical outlet. If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.
How long do Maytag washers last?
around 10 years
Does a Maytag washer have a fuse?
Maytag washers have a fuse in the lid-switch assembly. Maytag top-loading washers have a fuse in the lid-switch assembly. Checking the fuse with a multimeter determines if it needs replacing.
Why does my washer have no power?
If your washer doesn’t get power check the power source. Check whether your washer is plugged in or not. If it is plugged in then check the circuit breaker is on or blown a fuse. Check the breaker and replace it or replace the fuse as it is necessary.
Why did my washer just stopped working?
Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining. One thing that you can check yourself is the lid switch.
How do you drain a washer that stopped working?
What to Do When Your Washing Machine Won’t DrainPerform a Master Reset. Unplug your washer for about one minute. Test the Lid Switch Assembly. See if the Drain Hose is Kinked. Check the Drain Hose or Pump for Clogs. Clean out the Coin Trap. Check the Water Level Control. Schedule Washing Machine Repair.