What does e3 and f5 mean on a Cabrio washer?

What does e3 and f5 mean on a Cabrio washer?

The F5 E3 alert indicates there is issue with the lid lock. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

What does e3 mean on Whirlpool washer?

The error code F8 E3 means there is too much water in the machine which also means the water will not drain out. The F8 E3 error code will display when there is excess water in the tub. When the washer repeats the steps, it will cancel the washing cycle and will drain out all of the water from the tub.

How do you clear the error code on a Whirlpool Cabrio washer?

Try the Cabrio Reset Procedure Touch any button that you see on your display pad. This will clear the error code. Or you can press PAUSE/CANCEL. Choose a cycle and press START.

How do I fix SD error on Whirlpool Cabrio?

If your washer displays an SD error and will not go into the spin cycle, then the basket drive hub might need replacing. The whole tub should spin along with the impeller. If you can rotate the impeller while holding the inside tub still with your hand, then this might indicate that your drive hub needs replacing.

What does SD mean on Whirlpool Cabrio?

excessive detergent suds

Where is the reset button on a Whirlpool Cabrio washer?

Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.

What does colors with soak mean?

SOAKING CYCLES. Soak and wash in one cycle. Skip a trip to the laundry room with Soaking Cycles that start washing whites and colors as soon as they’re done soaking.

What setting do you wash colors on?

It offers good cleaning without significant fading or shrinking. When to Use Cold Water – For dark or bright colors that bleed or delicate fabrics, use cold water (80°F). Cold water also saves energy, so it is a good choice if you want to be eco-friendly.