What does DL mean on a Bravos XL washer?

What does DL mean on a Bravos XL washer?

Lid Lock Failure

Why does my Maytag Bravos washer make noise?

Drive Pulley Damaged After many uses though, drive pulleys often get bent, cracked, and generally worn out which can create noise while the unit is running. If you find your Maytag washer making loud noise when spinning due to a defective drive pulley, it will need to be replaced.

How do you reset the codes on a Maytag Bravos XL washer?

How do you clear the codes on a Maytag Bravos washer?Unplug the washer for 1 minute from the electrical outlet.Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.The motor has now been reset and is ready for you to start a cycle.

How do you reset the code on a Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

Is there a reset button on a Maytag washer?

Is there a reset button on a Maytag washer? Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.

How do you troubleshoot a Maytag washer?

Assess the load. Overcrowding your laundry with too many clothes (or not enough) can effect the water fill. Determine whether the washer is plugged into the electrical outlet. Remove any kinks from the drain hose. Close the washer’s lid securely to add pressure to the lid switch.

Why does my Maytag washer keep stopping?

Common solutions for: Maytag Washer stops mid cycle If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

What causes a Maytag washer not to spin?

One common cause why a Maytag top load washer won’t spin is due to an uneven load or jammed clothing. Larger items or loads tend to settle on one side of the washer drum during a cycle. Try to redistribute the load or remove a few articles of clothing and run the spin cycle on your washer again.

Why is my washer stuck in the spin cycle?

If you have a GE washer that’s stuck on its spin cycle, you’ll need to reset the machine. This is because the appliance is full of water during this cycle, and merely turning off the washer will leave it filled with water. Next, plug the washer back in and lift the lid six times in 12 seconds.

Why is my spin cycle not working?

Check the washing machine’s spin cycle. If the spin cycle works, the motor is operating and the belt is not broken. If the spin cycle doesn’t work, the belt may be loose or broken. Tighten or replace the belt.

How do I fix the spin cycle on my washing machine?

How do you fix a washing machine that won’t agitate?

Why won’t my washing machine agitate or spin?

Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.

Why does my Whirlpool washer not agitate?

The washer agitator repair kit houses the agitator components that are most likely to become damaged, wear out, or fail. If any of the parts are worn out, stripped, or defective in any way, then it’s time to replace the kit. This is the most common cause of a Whirlpool top load washer not agitating.

How do you check a Maytag washer transmission?

How long should a Maytag washer last?

about 14 years

Is it worth fixing a washer?

Repair: If the repair would cost less than 50% of the price of a new appliance and your machine still has several expected years of life left, a quick fix could be a cost-effective solution over replacing the entire washer. An active warranty can also make any repair worthwhile.

How do you check a washing machine transmission?