How do you reset the ice maker on a GE side by side?

How do you reset the ice maker on a GE side by side?

This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.

Why is my ice maker not making much ice?

Cause: A common cause for a clog is frozen water in the line. Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

How do you adjust a GE ice maker?

Turn the small adjustment set screw on the upper, middle right hand side of your ice maker a half of a turn with a Phillips or flat head screwdriver, depending on the screw your ice maker has. Turning the screw clockwise will decrease the water level and turning it counterclockwise will increase the water level.

How do you force a GE ice maker to cycle?

The service mode is entered by pushing the feeler arm in and out three times within 15 seconds. (only three times). There will be only one fill cycle (5.1 second) in the service diagnostics mode without the waiting period for the mold to ‘pre-chill’.

Why did my GE refrigerator stop making ice?

If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. Before replacing the ice maker assembly, check the water inlet valve, water line, and fan.

Where is the reset button on GE refrigerator?

This shutoff feature is usually located at the top of the ice maker. Push it up and down three times to reset the refrigerator.

How do you turn off the ice maker on a GE side by side refrigerator?

For GE electronic ice makers, there may be an on/off toggle switch. The I is for on, and a green light will be lit. To turn it off, set the power switch to O for off. If there is an on/off slide switch, you turn it off by sliding the switch, so the paddle is under the icemaker.

Where is the ice maker switch on a GE refrigerator?

This icemaker is primarily found in bottom freezer and French door refrigerators, though it can also be found in other styles as well.To turn ON the icemaker, slide the switch over so that the paddle is extended out past the icemaker.To turn the icemaker OFF, slide the switch so the paddle is under the icemaker.

Does ice maker stop when full?

Our ice makers are designed to stop when they’re full. There’s two methods for this, depending on which type of ice maker your model has. Either an optical sensor detects when ice has piled too high, or a mechanical arm is pushed upwards when the ice piles high enough.

Where is the feeler arm on the ice maker?

The feeler arm is either a metal rod on the side of the icemaker or a plastic paddle that sits horizontal under the icemaker. If the arm or paddle is broken, the icemaker needs to be replaced. You can order from GE Appliance Parts at 1-or purchase a GE Appliance part online.

Why is my ice maker overflowing with water?

If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.

What does an ice maker solenoid do?

This optional refrigerator accessory automatically generates ice by using an electrical switch circuit. The electrical component that activates a valve to allow water to flow into the ice making area is called the solenoid.