How do I use the delay start on my Kenmore oven?

How do I use the delay start on my Kenmore oven?

How to Use the Delay Start on a Kenmore OvenCheck the time on your oven display, make sure the correct time is displaying.Set your food in the oven, then close the oven door.Press the “Bake” button, and then adjust the baking temperature by moving the up or down arrows.Select “Cook Time.” Program the hours and minutes your dish needs to bake for.

How do you auto clean a Kenmore oven?

How Self-cleaning Ovens WorkRemove all pans and foil from inside the oven before you clean. Clean up as much baked-on food or grease as you can easily remove. Lock the oven door. Time the cleaning using the controls provided. Let the oven cool after the cleaning cycle. Wipe away ash residue with damp cloth.

How long does a self cleaning oven take to clean itself?

The cycle takes from one and a half hours to three hours, depending upon the amount of soil. A slight odor may be detected the first few times the oven is cleaned. No commercial oven cleaner or oven liner of any kind should be used in or around any part the of the self-clean oven.

How do you unlock a Kenmore self cleaning oven?

Press the oven stop or clear button for three seconds to stop the cleaning cycle. If the oven isn’t too hot, the lock will immediately release, allowing you to open the door. If the internal temperature is too high, however, you must wait for the temperature to drop and the lock mechanism will automatically clear.

How do I stop my Kenmore oven from self cleaning?

To deactivate it, hold the stop button down for at least 3 seconds. During self-cleaning, the oven heats to a high temperature to incinerate any debris inside of it. The door cannot be opened until the oven cools. You could choose to wait for the self-cleaning cycle to end on its own.

How do I clear the code on my f93 Kenmore oven?

By unplugging the appliance it allows the control to receive a fresh supply of power. This in turn will clear the controls memory of any irregularities it may have received from the power supply. Once refreshed the error should no longer be displayed. Unplug the unit or turn the circuit breaker off for 60 seconds.