How do I turn off the CL code on my LG dishwasher?

How do I turn off the CL code on my LG dishwasher?

Press and hold Dual Zone for 3 seconds to activate or deactivate this function. The control lock indicator will illuminate on the control panel if the feature is activated. Note: You must deactivate the control lock feature to select new settings. The Control Lock feature does not lock the door.

How do I unlock my LG CL washer?

To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly. NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds to turn CHILD LOCK OFF.

What is a CL code?

CL: Stands for changelist, which means one self-contained change that has been submitted to version control or which is undergoing code review. Other organizations often call this a change or a patch.

What does code CL mean on LG washer?

child lock feature

What does code CL mean on LG dishwasher?

Child Lock

How do I fix the code on my LG dishwasher?

The LE error or fault code on your LG Dishwasher indicates an issue with the water circulation pump motor. -Turn off the LG Dishwasher for 30 to 45 minutes to let the motor cool down as it may have overheated. -After 30 to 45 minutes start a new wash cycle and check if the LE error code shows again.

How do you reset LG washing machine?

How to reset the washing machine:Press POWER to turn the washer off.Unplug the washer from the power outlet or turn the circuit breaker to the unit off.With the power disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in, or turn the circuit breaker back on.

How do I bypass the lock on my LG washer?

To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.

How do you bypass a washing machine lock?

How to Bypass a Washing Machine Lid LockTurn off the washer and unplug the appliance. Locate the retaining tabs and/or screws that hold the top horizontal panel down. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance. Put the lid back down and plug the washing machine back into the electrical outlet.

How do I turn off the CL code on my LG dishwasher?

How do I turn off the CL code on my LG dishwasher?

Press and hold Dual Zone for 3 seconds to activate or deactivate this function. The control lock indicator will illuminate on the control panel if the feature is activated. Note: You must deactivate the control lock feature to select new settings. The Control Lock feature does not lock the door.

How do I reset the CL on my LG dryer?

Reset the Control PanelPower the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that’s easier).Press and hold the START/PAUSE key for 5 seconds while the unit is without power.Turn the breaker back on, and power on the unit.

How do I unlock my LG Inverter Direct Drive?

To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.

How do I turn off LG child lock?

To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly. NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds to turn CHILD LOCK OFF.

How do I turn off the child lock on my washing machine?

When the child lock is activated, there will either be a key symbol or a “CL” symbol in the display and all the washing machine buttons will be disabled. To deactivate the child lock, press and hold the start button for three to five seconds.

How do I reset the lid lock on my GE washer?

Make sure the washer is paused (press Start/Pause). During spin, this can take up to 3 minutes for the basket to stop spinning and allow you to open the lid. Unplug the washer for a minute to reset.

Do GE washers have a reset button?

To reset washing machines that use the GE Hydrowave system, start by unplugging the washer for one minute. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. Raise the lid at least 2 inches and make sure it closes each time. This should complete the motor reset.

Why is my lid lock flashing?

The Lid Lock Light will flash if Lid Lock has not moved into the Lock Position, the Lock Motor can not be powered, or the Lid is not closed completely due to interference. Some models will lock immediately, while others will not lock until after the wash cycle has started.

How do I turn off the control lock on my GE washer?

To lock or unlock the washer controls:Press and hold the LOCK button for 3 seconds.A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when it is on.

What does CL mean LG washer?

child lock feature

What does the code CL mean on my Maytag washer?

The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cycle has completed or after three cycles.

How do I fix the Le code on my LG washer?

How to reset the washing machine:Press POWER to turn the washer off.Unplug the washer from the power outlet or turn the circuit breaker to the unit off.With the power disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in, or turn the circuit breaker back on.

What does IE code on LG washer mean?

An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.

How do I troubleshoot my LG washer?

How to Troubleshoot LG Washer ProblemsAdjust your clothes. Check the drum and drain filter for foreign objects. Adjust the leveling feet at the base of your LG washer. Check your hoses. Check the power. Contact LG customer support, if none of the previous steps help.

Where is the Hall sensor on LG washer?

Locate the Hall sensor connector on the stator behind the rotor.

What is a Hall effect switch?

A Hall effect switch turns on in the presence of a magnetic field and turns off when the magnet is removed. A Hall effect latch turns on (closes) when a positive magnetic field is applied and remains on even when the magnet is removed.

What does the rotor position sensor do?

Product Description. This high quality Genuine OEM LG Rotor Position Sensor (6501KW2002A) monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. The Rotor Position Sensor is also called a Hall Sensor or Motor Sensor.

How do you clean a stator?

Clean the stator by spraying or brushing on with mineral spirits and follow with wiping and blowing out with compressed air. Let it dry over night before applying your sealant. Mineral spirits will not damage your paint nor the winding coatings and is just a very good cleaning and degreasing product.

What does a washer stator do?

The Motor Stator Assembly works with the motor rotor to rotate the spin basket and has external diameter of 11″. Please be aware that all utilities should be disconnected from your Washing Machine Appliance prior to replacing the Motor Stator Assembly.

What does a stator do on a washing machine?

True to their names, the stator is an outer, non-moving, chamber in which the rotor spins. The stator creates a magnetic force through alternating current that “induces” the rotor to turn.