How dO I reset the error code on my Samsung dryer?

How dO I reset the error code on my Samsung dryer?

To reset EEPROM for your dryer model you can unplug it from mains for approx. 10 minutes. After 10 min. s plug in the dryer back in and hold down the Wrinkle Prevent and Mixed Load Bell buttons at the same time for 3 seconds.

Why is my Samsung dryer not working?

Check the dryer belt to determine if it is broken. If the belt is broken, replace it. If you have a gas dryer, unplug the dryer from the wall and plug something else into the outlet to determine if the outlet is working. If you have an electric dryer, check the home circuit breaker or fuses.

Is there a fuse on a Samsung dryer?

Your dryer can generate a lot of heat, and that can be dangerous if the electrical components are malfunctioning. That’s why every dryer comes with a thermal fuse. Order replacement part #DC for Samsung dryers and follow these steps to get your appliance back in working order.

How do you reset the ventilation sensor on a Samsung dryer?

Run a Vent Blockage testWhen you’re ready to start, make sure the drum is empty and then close the door. Press POWER to turn the dryer on and within 5 seconds, press and hold Adjust Time Up + Dry Level until InS or In appears on the display. Press and hold START/PAUSE to start the Vent Blockage test which lasts for approximately 2 minutes.

Why does my Samsung dryer keep shutting off?

It stops because u didn’t chose the rack dry option on the display. You turn to the “time dry” option and than click on the rack dry option, and it will keep drying until time runs out.