How do I reset my Whirlpool Duet steam dryer?
How do I reset my Whirlpool Duet steam dryer?Inspect household fuses or breakers.Close the dryer door firmly.Press and hold the “Start” button for five seconds.Check the display on the dryer for error codes.Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.
How do I reset my Whirlpool front load dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
Why is my Whirlpool Duet dryer stuck on sensing?
If the dryer is not level, the sensing does not work properly, and your drying cycle will end early. All Whirlpool Duet dryers have sensor strips in the drum. As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry.
What does f1 mean on a Whirlpool Duet dryer?
WHIRLPOOL CABRIO DRYER F01 ERROR EXPLAINED. The whirlpool Cabrio dryer F01 error means the main control has an internal failure. This can happen at any time when a component on the control board has failed but most commonly this happens when your home has a power surge and shorts the main control board.
How do I get the control lock off my Whirlpool dryer?
To lock and unlock the dryer controls: Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
How do I clean the lint from my Whirlpool front load dryer?
Every load: clean dryer lint screen. As needed: clean lint trap and exterior….Every six months: deep clean lint screenRoll lint off, then wet both sides with hot water.Scrub with nylon brush, hot water and liquid detergent to remove buildup.Rinse with hot water and dry thoroughly.