How do I reset my bravos MCT washer?

How do I reset my bravos MCT washer?

Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.

How do you reset the error code on a Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I reset my LG top load washer?

How to reset the washing machine:Press POWER to turn the washer off.Unplug the washer from the power outlet or turn the circuit breaker to the unit off.With the power disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in, or turn the circuit breaker back on.Lisää kohteita…•

How do I troubleshoot my LG washer?

To fix this:Press POWER, and turn the machine OFF.Unplug the machine.With the power being disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in.Power the unit back ON.Press-in on the door firmly.Select any cycle, and press START/PAUSE.

Why did my LG washer stop working?

No power issues are typically caused by a tripped circuit breaker, a faulty electrical outlet, a power outage in the home, or in rare cases a unit that requires a repair.

Why does my LG washer stop mid cycle?

During the rinse cycle, the water inlet valve opens to allow water to enter the wash tub. If the water inlet valve fails, the washer will continue waiting for the water to enter the washer, causing it to stop mid-cycle. To determine if the water inlet valve is defective, use a multimeter to test it for continuity.

How do I run a diagnostic on my LG front load washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I calibrate my LG washer?

How do I calibrate my LG washer?Power off, and then power on the washing machine.Hold down Temp. Press and hold Start/Pause (Hold to Start) to run the Calibration cycle.When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically.

Why does my LG washer always say UE?

The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself.

How do I increase the water level in my LG washer?

Most LG top load washers have a “Water Plus” button that will allow you to increase the water level of the load. Under normal operation, this feature won’t be necessary.

How do I soak my LG top loader?

Load your washer and set it as usual. Turn it on and wait until the tub has filled with water (before the first spin cycle or when it just starts) and then pause your washer. This will allow you to soak for however long you’d like (I’d recommend thirty minutes or so) and then proceed with the rest of the cycle.

What is Turbo Wash LG?

The Turbo Wash feature on your LG washing machine uses the power motion wash action system along with increased water temperatures to enhance and speed up the wash cycle. Result in shorter wash times without sacrificing wash performance.