How do I know if my Whirlpool tumble dryer is faulty?

How do I know if my Whirlpool tumble dryer is faulty?

If your machine doesn’t have a green sticker, you need to check if it’s faulty. You can do this by locating the serial code and model number (found on the back of the dryer or on the back of the dryer door) and entering it onto the online checkers at safety.hotpoint.eu or safety.indesit.eu or safety-swan.eu.

What does it mean when Whirlpool Dryer says Sensing?

As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. If the dryer is not level, the sensing does not work properly, and your drying cycle will end early.

What’s the difference between automatic dry and timed dry?

Difference between auto dry and timed dry: Automatic Cycle: During Automatic Cycles, drying air temperature and moisture level are sensed in the load. Timed Dry: With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.

Why is my Whirlpool dryer not drying?

If you have a dryer not drying in one cycle, the solution could be as simple as cleaning the lint trap. It should be cleaned every time you run a load of clothes in the dryer. To clean the lint trap in the dryer, just pull out the trap before starting the dryer and swipe all the lint out.