How do I fix the ER on my LG refrigerator?

How do I fix the ER on my LG refrigerator?

A FF error code indicates that the unit has detected an issue with the freezer fan. This can sometimes be caused by frost buildup. Unplug the unit and remove all food and ice from the ice bin. Leave the doors open and wait at least 8 HOURS for the refrigerator to defrost.

How do I clear the error code on my LG refrigerator?

Unplug the LG fridge and wait 20 minutes Plug back into power Many times the code will clear or reset.

Is there a reset button on LG refrigerators?

Most refrigerators, including the LG line of appliances, can be reset the same way. The small item does a big job in the appliance. To reset an LG refrigerator after removing and replacing the water filter, simply press and hold the flashing button for a minimum of three seconds.

What does ER if mean on LG refrigerator?

LG Refrigerator Error Code Er IF & LG Refrigerator Error Code Er 1F. The Er IF Error Indicates The Ice Maker Blower Fan has a Loose Wiring Connection or may be Frozen or the Ice Maker Motor is Faulty. Wiring on the Fan to or from the Control Board is Damaged, Not Connected, or Loose.

How do I reset my LG inverter refrigerator?

Try unplugging the unit or trip the circuit breaker for 30 seconds to RESET THE REFRIGERATOR. You should hear the compressor kick back on and the unit will stabilize and start cooling within 24 hours. If not, then there is a power supply problem and the unit will require a repair service.

How do I run diagnostics on my LG refrigerator?

Lock the control panel by holding the lock button for 3 seconds. Once locked, open the right side refrigerator door….You can run Smart DiagnosisTM on your smartphone using the SmartThinQ app.On your phone, press the SETTINGS button.Press SMART DIAGNOSIS button.Select the START SMART DIAGNOSIS option.

Where is the reset button on LG refrigerator?

You can reset it to operational mode by opening the left side door, holding down the ice plus or lock button and refrigerator button together for five seconds, and it will ding as it initializes and turns on.

How do I test the sensor on my LG dryer?

To test this type of moisture sensor, place damp clothes in the dryer. Watch the timer; as the clothes begin to dry, the thermostat should open and the timer will move forward, eventually shutting off.

Why does my LG dryer keep shutting off?

INTERRUPTED POWER: The cycle may have shut off due to an interruption of the power supply. SMALL LOADS: Small loads may also cause the cycle to end abruptly because the clothes will not brush against the sensors at the front of the drum.

How do I reset the sensor on my LG dryer?

To fix it, we’re going to do a factory reset.Unplug the dryer or trip the circuit breaker supplying power to the dryer off.While the dryer is without power, press and hold the Start/Pause button for 5 sec.Restore power and try to run a cycle.

Why does my electric dryer keep shutting off?

The dryer heats up and then will shut off. Most likely, a thermal overload switch is shutting down the dryer because it’s getting too hot or the motor is overworking. A gas dryer can get too hot if the vent is clogged and, eventually, this can damage the motor. Or the overload switch itself can go bad.