How do I fix my KitchenAid refrigerator that is not cooling?

How do I fix my KitchenAid refrigerator that is not cooling?

If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor.

How do you reset a KitchenAid refrigerator?

Reset the refrigeratorPower unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.Power unit up by turning on the circuit breaker(s) or plugging the product back in.Ensure the cooling function is turned on.Test the control panel functionality.

What happens when a refrigerator stops cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Plug in the fridge and make sure the fan runs when the compressor is running.

How do I run a diagnostic on my KitchenAid refrigerator?

To enter the diagnostics mode: Press the control POWER button and the water filter RESET button simultaneously for 3 seconds.

How long will a KitchenAid refrigerator last?

between 15 and 17 years

Do French door refrigerators have more problems?

The average repair on a French door refrigerator is 26 percent more costly than the average repair for side-by-side units. Failures include malfunction of the crushed-ice maker, the bottom freezer not maintaining temperatures, or the icemaker leaking and making loud noises.

Is it worth replacing compressor on refrigerator?

If you only need a basic refrigerator, something completely new may be better for your budget, but if you need features like a water or ice dispenser, replacing the compressor is worth considering, especially if your unit is relatively new.

How do you know if your refrigerator compressor is bad?

Hold the relay in your hand, and give it a bit of a shake. If it rattles, this relay is bad and can be replaced for about $20. If you shake the relay but there is no rattle, chances are fairly good that the relay is good, but your compressor is bad.

How much does it cost to replace a compressor in a refrigerator?

What’s the Cost to Replace a Refrigerator Compressor? The cost to replace one is between $300 and $550, dependent on the cost of the item and labor. If a compressor has a faulty relay switch repairs can cost roughly about $50 to $200.

How do you reset the compressor on a refrigerator?

How to Reset the Compressor on a FridgeLocate the refrigerator power cord on the back of the appliance.Disconnect the power cord from the wall outlet. Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. Adjust the fridge and freezer controls to the desired setting. Allow the fridge up to one day to adjust to a stable temperature.

Should I repair or replace my refrigerator?

As a rule, Consumer Reports recommends replacing a product if the cost of the repair is more than half the price of buying a new one. You can make your own call by checking our updated repair-or-replace timelines.

Is a 15 year old refrigerator worth repairing?

If the refrigerator is less than eight years old, consider repair. If the refrigerator is more than 15 years old, consider replacement. If the fridge is between eight and 15 years old, you must take other factors into consideration, such as the type of refrigerator and its environmental efficiency.

Which French door refrigerator brand is most reliable?

The 7 Best French Door Refrigerators of 2020Best Overall: Whirlpool French Door Refrigerator at Home Depot. Best Budget: LG Electronics French Door Refrigerator at Home Depot. Best with Drawer: GE Profile Smart 4-Door Refrigerator at Home Depot. Best Counter-Depth: Samsung Counter-Depth Refrigerator at Wayfair. Best with Custom: Best Large Capacity: Best Smart:

How do I fix my KitchenAid refrigerator that is not cooling?

How do I fix my KitchenAid refrigerator that is not cooling?

If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor.

How do you reset a KitchenAid refrigerator?

Reset the refrigeratorPower unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.Power unit up by turning on the circuit breaker(s) or plugging the product back in.Ensure the cooling function is turned on.Test the control panel functionality.

Why is my refrigerator running but not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). Clean the fan blades and spin the fan by hand to see if it’s stuck. Plug in the fridge and make sure the fan runs when the compressor is running.

Why is my KitchenAid Freezer not freezing?

If the condenser coils are dirty or have not been cleaned in a while, clean them. The evaporator fan motor draws air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan motor is not working, the freezer will not cool. If the compressor won’t run, the freezer will not cool.

Why has my fridge gone warm?

There’s a chance that your temperature sensor is broken or not correctly set. Or that the defrost timer is broken, or the vent fan between the compartments. There might be something wrong with your compressor, you might have a coolant leak, or it might just be a loose wire somewhere along the way.

Why is my side by side refrigerator not cooling?

The evaporator fan motor circulates the cold air from the coils thru the compartment. If there is only one evaporator it is in the freezer side. If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective.

Can a refrigerator go out and the freezer still work?

6 Answers. Yes. If the device has separate compressors for the fridge and freezer then it’s perfectly possible for one to fail and the other keep working. Generally the cheaper the fridge/freezer the more likely it is to only have a single compressor.

How do you know if your fridge is broken?

7 Major Warning Signs That Your Refrigerator Is BrokenIt’s Not Cold Enough. Are you not feeling a chill when you open your fridge? Your Food is Spoiling Quickly. Not all changes in temperature are so dramatic that you can feel it as soon as you open the fridge. There’s Condensation. Ice Is Building Up in the Freezer. The Motor is Hot. It’s Loud. There’s Water on Your Floor.

How do I know if my refrigerator damper is bad?

Damper Control – Not Opening Or Broken When the damper does NOT open, then cold air does not flow properly. Be sure to visually look at the damper to see if it is stuck closed. If the air damper is broken, replace asap.

How warm can a refrigerator get before food goes bad?

According to the FDA and USDA, certain perishable foods that have been kept at a temperature above 40 degrees Fahrenheit for more than two hours should be thrown out. This includes meat, poultry, fish, soft cheeses, dairy products, eggs, cooked or cut produce, and cooked leftovers.

How do you check a temperature without a thermometer?

Without a thermometer When using touch to diagnose a fever in someone else, touch your own skin first, then touch the other person to compare the two temperatures. If the other person is a lot hotter than you, they may have a fever.

Is 6 degrees too warm for a fridge?

Experts say the optimum overall temperature for a household fridge is between 0c and 4c. ‘Keeping your fridge below four degrees centigrade — but not below zero, the freezing temperature of water, which will turn the water in foods to ice — will ensure that it stays fresh for longer. ‘

Is 5 degrees OK for a fridge?

The coldest part of the fridge should be between 0 degrees Celcius and 5 degrees Celcius (32 degrees Fahrenheit and 41 degrees Fahrenheit). You could use a probe thermometer to check if food is being kept hot (above 63 degrees Celcius) or cold (below 8 degrees Celcius).

Is 10 degrees cold enough for a fridge?

The temperature inside your refrigerator needs to be cold enough to inhibit bacterial growth, and warm enough so the food doesn’t freeze. Refrigerators should be set to 40 degrees F (4 degrees C) or colder. A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C).

At what temperature should I keep my fridge?

40° F

Is a fridge colder on 1 or 5?

Some fridges don’t show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge’s temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be. Choosing setting 5 will make your fridge the coldest.

Will food spoil at 45 degrees?

Food starts to spoil when the temperature rises above 40 degrees. After food warms to that temperature, you have just two hours in which you can either return it to cold conditions or cook it. In the fridge, produce will survive most power failures, but dairy products should be discarded if they smell or taste sour.