How do I clear the error code on my Frigidaire Affinity washer?

How do I clear the error code on my Frigidaire Affinity washer?

To clear latest stored error code:Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code.Press and hold the Options and Pause Cancel buttons for 3 seconds. The code will be cleared.Exit Diagnostic Mode to return the washer to normal operation.

How do I reset my affinity washer?

How do I reset my washing machine?Unplug the washer for 1 minute from the electrical outlet.Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.The motor has now been reset and is ready for you to start a cycle.

Why does my affinity washer keeps pausing?

PAU Error. The PAU, or pause, error usually means that the washing machine cycle was interrupted and was not restarted properly. If the washer was stopped midcycle and not restarted, the cycle must be canceled or completed before a new selection can be made.

How do you run a diagnostic on a Frigidaire washing machine?

Place the control into Diagnostic test Mode. Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code. Press and hold the Options and Pause Cancel buttons for 3 seconds.

How do you reset a Frigidaire Affinity front load washer?

How to Reset the Settings on a Frigidaire Front WasherVerify that your Frigidaire front washer is plugged into a working electrical outlet and turned on; otherwise, you won’t be able to reset it.Press and hold the “Spin Speed” and “Soil Level” buttons together for a few seconds.Continue holding the buttons until a signal sounds then release them.

How do I troubleshoot my Frigidaire Affinity washer?

How to Troubleshoot a Frigidaire Affinity WasherStop the washing machine if rattling or clanking sounds occur. Redistribute the load if you hear a thumping sound. Level the washer if the machine vibrates. Plug the power cord in and check household fuses or breakers. Turn the water supply faucets on completely. Wait for the washer to cool down.

How do I find the error code on my Frigidaire Affinity Dryer?

How to Retrieve the Error Codes in a Frigidaire Affinity Front Load DryerPress and release any button on the dryer’s display panel to awaken it from idle mode.Wait for 5 to 10 seconds then push and hold “Start/Pause” and “Cancel” at the same time.Watch for the indicator lights on the control panel to flash.

Why won’t the water drain out of my washing machine?

There could be a number of reasons why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the the hose being jammed.

How do I reset the OE code on my LG washer?

Slide the clean drain pump filter back into the washer. Be sure the filter is put back secure. Put the cover back on the drain pump filter by turning it clockwise. Once the filter is cleaned, re-secured, and free from any blockages, wash a small load to be sure the error code OE has cleared.