Why does my oven clock keep resetting?
If clock is not keeping the correct time, it may be due to electrical spikes or surges affecting the software in the clock. To correct: Turn the power off at the breaker or fuse box.
How do I reset my Whirlpool oven?
Reset power to the product:Power unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Monitor the oven/range for one (1) minute to ensure the error code does not display again.
How do you troubleshoot a Whirlpool oven?
Check/Troubleshoot = Unplug the oven power cord or turn OFF the circuit breaker. Reconnect keypad wiring harness. Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display.
Why is Whirlpool oven locked?
Door is locked during Self-Clean cycle If power was interrupted during a Self-Clean cycle, and the cycle did not resume, select the “Self Clean” option, then select “Cancel”. Wait a couple of minutes then try to start the cycle again. The oven will need to cool to approximately 200F(95C) before the oven door will open.
Where is the fuse on a Whirlpool oven?
The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together.
Where is the fuse in the oven?
Servicing Fuses If the range or oven is receiving power but doesn’t work, the unit may have its own fuse or circuit breaker assembly. This assembly is usually located under the cooktop of the range.